The OpenDefinery is a lean set of Shared Parameters for use at the program level.
Private
The OpenDefinery is a lean set of Shared Parameters for use at the program level.
PARAM | DATATYPE | TAGS |
---|---|---|
Amzn_Asset_Dim_Depth
The nominal depth of an asset. |
LENGTH | DefaultGroup |
Amzn_Asset_Dim_Height
The nominal height of an asset. |
LENGTH | DefaultGroup |
Amzn_Asset_Dim_Length
The length of an asset to be used with objects that can be defined as linear (e.g., railing, duct, walll finishes). Most assets should be assigned height, width, and depth rather than length. |
LENGTH | |
Amzn_Asset_Dim_Thickness
|
LENGTH | ExportedParameters |
Amzn_Asset_Dim_Width
The nominal width of an asset. |
LENGTH | DefaultGroup |
Asset_Classification
Assign assets to custom classifcations to create subsets of assets (e.g., refrigerated, ambient, wireless, etc.) |
TEXT | |
Asset_Connect_Electrical
This asset has an electrical connection. |
YESNO | DefaultGroup |
Asset_Connect_Mechanical
This asset has a mechanical connection. |
YESNO | DefaultGroup |
Asset_Connect_Plumbing
This asset has a plumbing connection. |
YESNO | DefaultGroup |
Asset_Connect_Refrigerant
This asset has a refrigerant connection. |
YESNO | DefaultGroup |
Asset_CostCode
The cost code for the asset. |
TEXT | DefaultGroup |
Asset_Id
The unique identifier for a specific manufacurer, model number, and configuration of an asset. Note that this should not include the instance modifier parameter. |
TEXT | |
Asset_Id_DesignId
[TO BE DEPRECATED] This parameter is carried over from legacy projects where Design ID was used to tag fixtures and equipment. |
TEXT | DefaultGroup |
Asset_Id_DesignId_Prefix
[TO BE DEPRECATED] This parameter is carried over from the Norr legacy projects where the Design ID's were prefixed with this value. |
TEXT | DefaultGroup |
Asset_Id_Facility
The unique identifier of a particular AID instance within a facility. This value is referenced by facilities management. |
TEXT | DefaultGroup |
Asset_Id_Legacy
A concatenation of legacy Design ID values. This is a transitional parameter and will be deprecated. |
TEXT | DefaultGroup |
Asset_Id_Modifier
An instance-specific modifier for the PID which is visible in tags (e.g. a multi-deck which is set to a dual temperature). |
TEXT | DefaultGroup |
Asset_Id_TypeMark
Classify families as types (e.g., AHU, RTU, VAV, WAP, etc.). Typically concatenated with another parameter for identifiers. |
TEXT | |
Asset_Location
The location of an instance of an asset (i.e. the room department or area of a facility). |
TEXT | DefaultGroup |
Asset_Renovation_Activity
The type of renovation for an asset. Typically used to indicate if a fixture is relocated (RL) or retrofitted (RF) with new parts. |
TEXT | |
Asset_Rspnsblty_ConnectedBy
Specifies who is connecting this asset in the field. |
TEXT | DefaultGroup |
Asset_Rspnsblty_InstalledBy
Specifies who is installing this asset in the field. |
TEXT | DefaultGroup |
Asset_Rspnsblty_ProcuredBy
Specifies who is procuring this asset. |
TEXT | DefaultGroup |
Asset_Rspnsblty_ReceivedBy
Specifies who is receiving this asset. |
TEXT | DefaultGroup |
Asset_SerialNumber
The serial number of an asset. |
TEXT | DefaultGroup |